In the general case, when we repair the copier, we can't avoid the toner cartridges of the copiers. If we accidentally broke the toner cartridges, what should we do? Or, at some point, our copiers will be used for a long time. The toner cartridge is aging, what should I do? In fact, the structure of the toner cartridges of many copiers is similar. The parts that are easily damaged are nothing more than drum cores, waste paper windows, and scrapers. We need to learn how to repair the toner cartridges. Come to the photocopier for easy repair.

    The toner cartridge of the copier has a problem of work fatigue. Therefore, the continuous working time cannot be too long. If the workload is large, it can be resumed after a while after working for a while.

    Clean and maintain the toner cartridge regularly by carefully removing the toner cartridge assembly and wiping the surface with absorbent cotton, but do not use force to prevent the surface of the toner cartridge from being scratched. Then, wipe the surface of the toner cartridge with a special detergent for defatted cotton enamel cartridges. When wiping, use a spiral-wax method. After polishing, wipe the cleaner with degreased cotton. Gently take a layer of talcum powder on the surface of the drum with gauze containing talcum powder and put it back in use.

    Usually, when replacing the toner, pay attention to clean the waste powder in the waste toner collection bin, and clean the waste toner bin immediately when the output “l(fā)eakage powder” is found. Because the waste powder accumulates too much, the phenomenon of “l(fā)eakage powder” will first appear. If it continues to be used, the waste powder contains paper ash, fiber and other dirt, which is rough, and rubs with the toner cartridge for a long time, and it is getting tighter and tighter. Getting bigger and bigger, the photosensitive film on the surface of the toner cartridge will be worn away, and the toner cartridge will be damaged.

    The copier powder box manufacturer should remind everyone that when the toner is found on the outside of the equipment during the replacement process, we can use a vacuum cleaner to remove it, and then scrub it with pure alcohol. In addition, the entire replacement process is carried out in a darker studio to prevent exposure of the drum. In addition, the general toner cartridge is valid for two and a half years without unpacking. Once the expiration date is only 6 months, the user should pay attention to the use within the validity period to ensure the copy quality.